16/784-85, Desh Bandhu Gupta Road New Delhi -110005 +91 9999805077 info@advanzoequipments.com

PULL-OFF TESTER (B-105)

EN 1015-12

  • Used to measure the adhesive force / bond tensile strength of two layers of concrete, facing plasters, mortars, building plasters, lime etc. to its base.
  • Manually-operated, compact, light and suitable for use in any location
  • Fitted with a load cell and high resolution large digital display unit.
  • Suitable for measurements from low loads up to 16 kN, granting a wide working range
Category:

Description

EN 1015-12

  • Used to measure the adhesive force / bond tensile strength of two layers of concrete, facing plasters, mortars, building plasters, lime etc. to its base.
  • Manually-operated, compact, light and suitable for use in any location
  • Fitted with a load cell and high resolution large digital display unit.
  • Suitable for measurements from low loads up to 16 kN, granting a wide working range

Supplied with

  • Tensile pin
  • Aluminum test plate – Ø 50 mm x 30 mm (10 ea) B-05/C/AL/50
  • Drill bit (Ø 50 mm) B-105/DB/50
  • Carrying Case

Technical specifications

  • Load capacity: 16 kN
  • Working range: 0,25 to 16 kN
  • Seat ball assuring axial/central load application
  • Battery operated

Accessories

<table class=”blueTable”>
<thead>
<tr>
<th>Code</th>
<th>Item</th>
</tr>
</thead>
<tbody>
<tr>
<td>B-105/C/AL/20</td>
<td>Aluminum Test Plate – Ø 20 mm X 30 mm</td>
</tr>
<tr>
<td>B-105/C/AL/50</td>
<td>Aluminyum Test Plate- Ø 50 mm X 30 mm</td>
</tr>
<tr>
<td>B-105/S/AL/50</td>
<td>Aluminyum Test Plate- 50 mm X 50 mm X 30 mm</td>
</tr>
<tr>
<td>B-105/C/SS/50</td>
<td>Stainless Steel Test Plate – Ø 50 mm X 20 mm</td>
</tr>
<tr>
<td>B-105/CR/50</td>
<td>Cylindrical Cutting Ring- Ø 50 mm</td>
</tr>
<tr>
<td>B-105/DB/20</td>
<td>Drill Bit – Ø 20 mm</td>
</tr>
<tr>
<td>B-105/DB/50</td>
<td>Drill Bit – Ø 50 mm</td>
</tr>
</tbody>
</table>

Downloads

Downloads

Related products